The following table shows the operations that can be used in Mastercam and are supported by CAM Assist:
...
Operation - name of the operation.
Abbreviation - abbreviation of the material, as used in the ‘Allowed Operations’ column of CAM Assist’s ‘Tool use’ table Tool Usages tab.
Tool type - associated tool type.
Toolpath type - associated checkboxes in the Advanced tab.
Alternative name - alternatives names for the ‘Operation’ that can also be used in Fusion and are supported by CAM Assist.
...
Operation | Abbreviation' (Tool Usages tab) | Tool type | Toolpath type | Alternative names |
---|---|---|---|---|
Ball finishing | Ba | Ball mill | Finishing | BallFinishing, Ball_Finishing |
Chamfering | Ch | Chamfer mill | Deburring | Chamfer |
Drilling | D | Drill | Hole making | Drill |
Face finishing | Ff | Face mill | Face milling | FaceFinishing, Face_Finishing |
Face roughing | Fr | Face mill | Face milling | FaceRoughing, Face_Roughing |
Finishing | F | Finishing | Finishing | |
Flat finishing | Fl | End mill | Finishing | FlatFinishing, Flat_Finishing, Floor Finishing, FloorFinishing, Floor_Finishing |
Helical boring | HB | End mill | Hole making | HelicalBoring, Helical_Boring |
Roughing | R | Roughing | Bulk roughing | |
Spot drilling | SD | Spot drill | Hole making | SpotDrilling, Spot_Drilling |
Tapping | Ta | Taps | Hole making | Tap |
Threading | Th | Thread mill | Hole making | Thread |
Wall Finishing | Wa | End mill | Finishing | WallFinishing, Wall_Finishing |