This guide takes you through the process of installing and locating the latest version of CloudNC’s CAM Assist add-on for Siemens NX.
Note |
---|
CAM Assist is a Siemens NX add-on: NX must be closed before updating CAM Assist. In order to update, there is no need to uninstall your currently installed version of CAM Assist.Please ensure you have a compatible version of NX. |
System Requirements
Note |
---|
Before installing, please ensure your system meets at least the ‘Recommended setting’ shown in the following table. |
Component | Recommended setting |
---|---|
Operating System |
|
CPU |
|
Memory |
|
Video |
|
Display resolution | 1920 * 1080 |
Storage |
|
Step-by-step instructions
Running the installation
Run the CAM Assist for Siemens NX Installation file.
1. Close Siemens NX
Note |
---|
Please ensure Siemens NX is closed before installing/updating the CAM Assist add-on. If updating, there is no need to uninstall your currently installed version of CAM Assist. |
2. Download CAM Assist
Download the appropriate version of CAM Assist for your Siemens NX software from our website.
3. Run the CAM Assist Installer
Locate the file you downloaded in Step 1 and run it (double-click) it.
Please take the following step-by-step installation instructions.
Step-by-step installation instructions
If you see the 'Windows protected your PC' blue dialog at the start of the install, take the following steps:
Click First, click the underlined More info. | Click Then , click Run anyway to proceed with the installation. |
The CAM Assist installation will now continue (see below).
The first part of the installation setup is the ‘Welcome’ page.
Click ‘Next’.
The next page holds the License Agreement (or Terms of Use Agreement).
Fully read the Terms of Use Agreement.
Click ‘I Agree’ to agree with the terms and continue the installation.
Info |
---|
Click ‘Cancel’ if you do not agree or if you have questions you would like to get answered before continuing (please contact CloudNC Support). |
When the installation has completed, a summary page is displayed.
Ensure the checkbox for ‘Run Autodesk Fusion 360Siemens NX’ is checked.
Click ‘Finish’.
Fusion 360 Siemens NX is opened automatically.
Info |
---|
Congratulations, the CAM Assist add-on to Siemens NX is now installed! |
Locating CAM Assist
Help and Support
Tip |
---|
If there are any other questions relating to the installation procedure or any other CAM Assist feature, refer to the CloudNC Product Support page. |