Page Comparison

...

1. Close Siemens NX

2. Download CAM Assist

Download the appropriate version of CAM Assist for your Siemens NX software from our website.

3. Run the CAM Assist Installer

• Locate the file you downloaded in Step 1 and run it (double-click) it.

• Carefully read the terms and conditions.

• Complete the installation process by following the on-screen instructions.

4. Finish Installation

• On the final page of the installer, there is an checkbox to ‘Run Siemens NX’:

  • Check the box to open Siemens NX automatically when the installer is closed

  • If you don’t Siemens to open automatically, uncheck the box.

Expand
title Click here to show/hide more detailed step-by-step installation instructions
If you see the 'Windows protected your PC' blue dialog at the start of the install, take the following steps First, click the underlined More info. Image Modified Then, click Run anyway to proceed with the installation. Image Modified The CAM Assist installation will now continue (see below). The first part of the installation setup is the ‘Welcome’ page. Click ‘Next’. Image Modified The next page holds the License Agreement (or Terms of Use Agreement). Fully read the Terms of Use Agreement. Click ‘I Agree’ to agree with the terms and continue the installation. Info Click ‘Cancel’ if you do not agree or if you have questions you would like to get answered before continuing (please contact CloudNC Support). Image Modified When the installation has completed, a summary page is displayed. Ensure the checkbox for ‘Run Siemens NX’ is checked. Click ‘Finish’. Siemens NX is opened automatically. Info Congratulations, the CAM Assist add-on to Siemens NX is now installed! Image Modified

Sign-up process

1. Verify Installation

• Open Siemens NX.

• Check that CAM Assist appears as a new item on the menu ribbon.

2. Open a Part

• Start with one of your own parts or open a demo part.

• To open a demo part, click on the demo parts icon under the CAM Assist section and select ‘Demo Part 1’ to start a new session in Siemens NX.

3. Sign-up for CAM Assist

• When you open CAM Assist for the first time, it will automatically open a webpage asking you to sign in.

• If you don’t have an account, scroll down and sign up for CAM Assist.

• Create a new password following the password guidelines, then press "Next".

• You will receive an email with a one-time verification code. Check your email and enter the verification code in the dialog box.

4. Start Using CAM Assist

• Assuming you have an active subscription to CAM Assist, you will see a confirmation page indicating a successful login.

• You can now start using CAM Assist.

Locating CAM Assist

• After installation, you should see a CAM Assist menu, as depicted in the image below.

• In you don't see the CAM Assist icon, open a part within the software and attempt the process again.

• Alternatively, if the CAM Assist icon is still not visible, right-click on the menu bar. Choose "Tabs/Bar" and ensure that "CAM Assist" is selected from the options.

Image Removed

Help and Support