Page Comparison

The Setup tab contains the following sections:

You can also select the following:

Tooltips contain useful information on the purpose and use of features within the ‘General' tab. To see a tooltip, just hover over a feature.

For more details on each of the above features, see below

Machining mode

CAM Assist provides the following Machining mode choices:

3 Axis - no other machine mode configuration is required.
3+2 Axis - if selected then a Machining Direction is required:
- Aligned to X, Y, Z axes - the tool orientation used to create toolpath strategies can only come from the +X, -X, +Y, -Y, and +Z axes.
- User defined - the tool orientation comes from the orientation specified by the user in the Target setup(s) within CAM Assist.
- Automatic - automatic 3+2 strategies are only available for evaluation through participation in CloudNC’s ‘Early Access Beta Program'.

Info
For detailed step-by-step instructions on using all four choices, see Machining modes in the 'How-to Guides' section.

The

content of the ‘Target

workpiece(s) contained within the 'Target setups’ section

reflects

reflect the workpiece configuration displayed in the 'Geometry View’ of the Siemens NX Operation Navigator

.

;

The content of the ‘Target setups’ section is affected by the choice made for ‘Machining mode’Machining mode (see above).

Info
For detailed step-by-step instructions on using the Target setups, see Machining modes in the 'How-to Guides' section.

The drop-down box contains a list of distinct actions that CAM Assist takes when it cannot correctly parse the model.

Errors can occur due to a fault in the model, or due to an incompatibility between the underlying CAD systems used by Fusion and CAM Assist.

In most cases, CAM Assist can continue to compute toolpaths for most or all of the part.

Available options:

Fail on errors - returns a description of the model problem.
Proceed with errors - process the model as received. The generated program may miss geometry or be incorrect in areas where the model has errors.
Attempt to fix errors - CAM Assist will try to fix the model's geometry. This can fix errors, but can result in modifications to the geometry that mean the program misses geometry or is incorrect.

Info
The better option between ‘Proceed with errors’ and ‘Attempt to fix errors’ depends on the specific part and error. In many cases, the best approach is to first try ‘Proceed with errors’ and, if that output is not correct, try ‘Attempt to fix errors’.