Page Comparison

Sections

The Machine tab contains the following sections:

Tooltips contain useful information on the purpose and use of features within the ‘General' tab. To see a tooltip, just hover over a feature.

For more details on each of the above features, see below

Sahand: from where are these value valuesThe min obtained?

The Machine section’s options are detailed in the following table.

Sahand: from where are these value obtainedvalues obtained?
Sahand: Why do the user need to know this? Why would the user change it?

The Spindle section’s options are detailed in the following table.

Option

Details

How to Use

Minimum speed (rpm)

The minimum revolutions per minute of the spindle.

To edit any of the Spindle’s properties:

Note
The values entered here are only specific to this CAM Assist session and do not affect the Machine’s configuration within XXX.

Maximum speed (rpm)

The maximum revolutions per minute of the spindle.

Maximum torque (Nm)

The maximum torque (in Newton-meters) of the spindle.

Maximum power (kW)

The maximum power (in kilowatts) of the spindle.

Image Removed

The Feeds section’s options are detailed in the following table.

Option

Details

How to Use

Maximum table feed (mm/min)

Image Added

The maximum speed (millimeters per minute) at which the machine's table/workpiece can move along its X, Y, and Z axes.

To edit the table feed:

Note
The values entered here are only specific to this CAM Assist session and do not affect XXX.