Machine
The Machine section’s options are detailed in the following table.
Option | Details | How to Use |
|---|---|---|
Name | The name of the machine associated with the selected part. | Read only (configured in Siemens NX) |
Library reference | The library reference for the machine. | Read only (configured in Siemens NX) |
Postprocessor | The postprocessors associated with the Machine. | Read only (configured in Siemens NX) Select a Postprocessor from the drop-down. |
Spindle
These editable Spindle settings are not configured in Siemens NX but are needed by CAM Assist to compute toolpath strategies.
The Spindle settings are detailed in the following table.
Option | Details | How to Use | ||
|---|---|---|---|---|
Minimum speed (rpm) | The minimum revolutions per minute of the spindle. | To edit any of the Spindle’s settings:
| ||
Maximum speed (rpm) | The maximum revolutions per minute of the spindle. | |||
Maximum torque (Nm) | The maximum torque (in Newton-meters) of the spindle. | |||
Maximum power (kW) | The maximum power (in kilowatts) of the spindle. |
Feeds
The Feeds section’s options are detailed in the following table.
Jack: why do we need this? Is it not in Siemens NX for the machine?
Option | Details | How to Use | ||
|---|---|---|---|---|
Maximum table feed (mm/min) |  The maximum speed (millimeters per minute) at which the machine's table/workpiece can move along its X, Y, and Z axes. | To edit the table feed:
|