...
Please be advised that CAM Assist’s ‘SteepAndShallow’ option is in Beta with ‘Contour3D’ currently the default. In some instances SteepAndShallow may yield better toolpaths and/or machining time results. This can be selected in the 'Finishing' section of the 'Advanced' tab. Also, you can’t edit roughing or finishing modes in the ‘Advanced’ tab if you don’t have these modes selected.
New User Interface (see CAM Assist’s Layout)
We have slimmed down the menus on CAM Assist to deliver the most used features on the General tab. So as well as your tool library and material, you’ll now find your workholding security per setup, as well as our new 3+2 orientation selection options.
All the other tabs have been combined into the ‘Advanced’ tab, with ‘Tool Use’ unchanged.
Hole Patching is enabled by default (see the Advanced tab)
You can toggle this setting in the ‘Roughing’ section of the ‘Advanced’ tab. Hole patching will prevent roughing passes from machining material away that would otherwise be handled by hole-making operations, like drilling.
Improved Error Handling
We now display error codes, enabling our support team to easily understand any issues, and further enhanced our messaging to assist users.
New Demo Parts (see the CAM Assist Panel)
We have two additional demo parts for you to try CAM Assist on, including a 3+2 part.
...
| Expand | ||
|---|---|---|
| ||
|
...