Versions Compared

Old Version 26

changes.mady.by.user Kevin Strider

Saved on

compared with

New Version Current

changes.mady.by.user Geoffrey Brennan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The ‘General’ section of the General Tab is expandable/collapsible; it enables you to specify the environment in which machining will take place, and edit do the following:

  • Specify the machining environment: ‘Tool library’and 'Stock material’.

  • Edit the properties of the

milling machine.

  • chosen ‘Machine’.

  • Specify the ‘Machining mode’.

Layout

The layout of the ‘General’ section changes depending on your action for the following:

  • Machine - clicking the drop-down arrow for the Machine displays a set of properties that CAM Assist needs to compute a toolpath strategy.

  • Machining mode - CAM Assist provides two modes:

  • 3 Axis

    • 3

    ‘3+2

    Axis

    Axis’ and ‘3 Axis’.

  • Machining direction - this is displayed only when the selected machining Machining mode is 3+2 Axis‘3+2 Axis’.

The screenshot to the right shows all of the ‘General’ section’s features, including the ‘Machine’ properties and the ‘Machining direction’ options.

For more information on each of these above features, see below.

image-20240513-103750.pngImage Removedimage-20240617-081808.pngImage Added

Features

The following table describes each feature in the ‘General’ section, as shown in the screenshot above screenshot.

Feature

Description

How to Use

Tool library

The Mastercam tool library to use within CAM Assist

Lists all of the Mastercam tool libraries available to CAM Assist.

  • Click the down arrow to select from the Tool library list.

  • Click image-20240612-095343.pngImage Added to refresh CAM Assist (if you change the selected Tool library).

  • Click image-20240612-095753.pngImage Added to select a system-level folder containing tool libraries.

Tool Summary

Shows a summary of the tool, including the following:

  • Number of tools - the number of tools in the selected ‘Tool Library’.

  • Number of

tool

  • tools for material - the number of tools in the selected ‘Tool library’ that can be used on the selected ‘Stock material’.

This feature is display only.

Stock material

Lists all of the materials that you can use in CAM Assist (see Supported Materials).

Info

CAM Assist will select tools, machining strategies, and cut parameters based on the

selected

Stock material

.For a full list of materials that you can use in CAM Assist, see Supported Materials

you select.

Click the down arrow to select the Stock material you want to use.

Machine

While the Machine itself

Shows the machine that will be used for the part. The machine is configured within Mastercam

,

but there is a set of properties that CAM Assist requires to compute toolpath strategies.

Follow the instructions to the right to check/amend the CAM Assist ‘Machine properties’.

Clicking

  1. Click the down arrow image-20240612-102523.pngImage Added to the right of the

‘Machine’ displays those required properties:These values

  1. machine name.

    • ‘Machine’ will expand to display the required Machine properties.

image-20240613-090601.pngImage Added

  1. The properties can be amended as follows:

    • Enter the value directly into the box.

    • Use the up/down arrow to increment/decrement the displayed value.

image-20240516-093628.pngImage Removed

Machining Direction

This section of the General tab is displayed when ‘3+2 Axis' is selected for the ‘Machining mode’.
For information, see Machining Modes

  1. After ensuring the properties are correct, you may click the up arrow to collapse/hide the Machine properties.

Machining mode

image-20240513-103927.pngImage Removedimage-20240513-104004.pngImage Removed

For more information on both Machining modes, see Machining Modes in the 'How-to Guides’.

See Machining mode, below.

Machining direction

Only displayed when ‘3+2 Axis' is selected for the Machining mode (see Machining mode, below).

Machining mode

Depending on which Machining mode is selected, the layout of the ‘General’ section changes, as shown in the following side-by-side screenshots.

Layout if the ‘3 Axis’ Machining mode is selected

image-20240612-101039.pngImage Added

Layout if the ‘3+2 Axis’ Machining mode is selected

image-20240612-100912.pngImage Added

Machining mode choices

As can be seen from the above screenshots, CAM Assist provides the following Machining mode choices:

  • 3 Axis

  • 3+2 Axis - if selected then a Machining direction is required:

    • Aligned to X, Y, Z axes - the tool orientation used to create toolpath strategies can only come from the +X, -X, +Y, -Y, and +Z axes.

    • User defined - the tool orientation comes from the orientation specified by the user in the Target setup(s) within CAM Assist.

    • Automatic - automatic 3+2 strategies are only available for evaluation through participation in CloudNC’s ‘Early Access Beta Program'.

Info

 For detailed step-by-step instructions on using all four choices, see Machining modes in the 'How-to

Guides’

Guides' section.