As it’s name suggest, the Cycle Time Estimator estimates the time required to machine each of the parts configured within a batch of Fusion files, which are specified by you.
The Cycle Time Estimator also creates a toolpath strategy for each of the parts.
Overview
To use the Cycle Time Estimator, you take the following steps:
Open the Cycle Time Estimator (see below).
Upload:
Select a batch of Fusion part files (you can specify up to 10 part files).
Set the ‘options’ for the machining environment
Click Run
Cycle Time Estimates - examine the results of the estimations by navigating the toolpaths (in the same manner as the Fusion Browser)
Results - look at the results of the estimates and identify any issues.
Export - export the results of the estimates for any of the part files. The export is a CSV (comma-separated values) file to a location of your choice.
Scope
The Cycle Time Estimator accepts up to 10 Fusion files.
If any Fusion file contains a configuration error then:
A cycle time estimation will not be computed for that file.
The error will be reported in the ‘Report’ tab.
For step-by-step instructions, see Using the Cycle Time Estimator
Opening the Cycle Time Estimator
To open the Cycle Time Estimator, take the following steps:
Within Fusion’s ‘Manufacturer’ workspace:
Open the CAM Assist panel (see the screenshot to the right)
Within the CAM Assist panel:
Click ‘Cycle Time Estimator’
The Cycle Time Estimator opens.
For more information, see Cycle Time Estimator - Features and Functionality.
