Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

CAM Assist is a Siemens NX add-on. NX must be closed before updating CAM Assist.

Please ensure you have a compatible version of NX (2206).

In order to update, there is no need to uninstall your currently installed version of CAM Assist.

The CAM Assist

This guide takes you through the process of downloading and installing the latest version of CloudNC’s CAM Assist add-on for Siemens NX.

Step-by-step instructions

Downloading the installation file

Running the installation

  1. Run the installation setup (double-click the file that was just downloaded).

Running the installation

  1. Run the installation setup (double-click the file) that was just downloaded.

The first part of the installation setup is the ‘Welcome’ page.

  1. Click ‘Next’.

image-20240117-150446.png

The next page holds the License Agreement (or Terms of Use Agreement).

  1. Fully read the Terms of Use Agreement.

  2. Click ‘I Agree’ to agree with the terms and continue the installation.

Click ‘Cancel’ if you do not agree or if you have questions you would like to get answered before continuing (please contact CloudNC Support).

image-20240117-150716.png

When the installation has completed, a summary page is displayed.

  1. Ensure the checkbox for ‘Run Autodesk Fusion 360’ is checked.

  2. Click ‘Finish’.

    • Fusion 360 is opened automatically.

image-20240117-150848.png

Congratulations, the CAM Assist add-on to Siemens NX is now installed!

Locating CAM Assist

  • After installation, you should see a CAM Assist menu, as depicted in the image below.

  • In you don't see the CAM Assist icon, open a part within the software and attempt the process again.

  • Alternatively, if the CAM Assist icon is still not visible, right-click on the menu bar. Choose "Tabs/Bar" and ensure that "CAM Assist" is selected from the options.

image-20240117-154336.png

Help and Support

If any problems occur during the download or installation or if there are any questions relating to the installation procedure, refer to the CloudNC Product Support page.

  • No labels