Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

CAM Assist provides two machining modes, available from the Setup tab: ‘3 Axis’ and ‘3+2 Axis'.

This section contains the following tutorials that will help guide you through the process of using the machining modes:

  • ‘3 Axis’ Machining mode tutorial

  • ‘3+2 Axis’ Machining mode tutorial

image-20240726-092510.png

This section contains two tutorials that use CloudNC’s ‘Demo 1’ part to guide you through the process of using Machining modes with CAM Assist.

Click on a step to jump to its page: it’s recommended you work through the tutorial following the step order.

Once you’ve completed the tutorial, you’ll have a basic understanding of how to use CAM Assist to create a toolpath strategy for your part.

You can then build on your knowledge with the CAM Assist for Siemens NX section, and other parts of this user guide.

This section contains the following ‘How to’ guides:

  • No labels