Docking and Resizing the CAM Assist panel

Docking

CAM Assist must be docked somewhere within Mastercam.

The following screenshots provide two examples of docking positions.

Resizing

You can change the width of CAM Assist with the following steps:

  1. Position the cursor on the edge of the CAM Assist interface.

    • The usual pointer will change to the resizing icon.

  2. Left-click and drag to the required width.

Docking examples

image-20240802-083501.png
CAM Assist is docked on the inside left of Mastercam
image-20240802-082729.png
CAM Assist is docked on the outside right of Mastercam