Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 26 Next »

This guide takes you through the process of installing and locating the latest version of CloudNC’s CAM Assist add-on for Siemens NX.

CAM Assist is a Siemens NX add-on: NX must be closed before updating CAM Assist.

In order to update, there is no need to uninstall your currently installed version of CAM Assist.

System Requirements

Before installing, please ensure your system meets at least the ‘Recommended setting’ shown in the following table.

Component

Recommended setting

Operating System

  • Windows 10 64-bit Professional, or

  • Windows 11 64-bit Professional

CPU

  • Intel® or AMD 64-bit processor,

  • 2.4 GHz or faster

  • Latest generation Intel i7/i9 processor, 3.2GHz or faster

Memory

  • Windows 10 → 8-12 GB, or

  • Windows 11 → 32-64 GB

Video

  • OpenGL 3.2 and OpenCL 1.2 support with 1 GB memory.

  • No onboard graphics.

  • NVIDIA RTX or AMD FirePro™/Radeon Pro card with 4 GB (or higher) dedicated memory.

Display resolution

1920 * 1080

Storage

  • Hard drive with at least 20 GB free USB and/or DVD drive (depending on installation media and licensing method)

  • Solid State Drive (SSD) with at least 20 GB free

Step-by-step instructions

1. Close Siemens NX

Please ensure Siemens NX is closed before installing/updating the CAM Assist add-on.

If updating, there is no need to uninstall your currently installed version of CAM Assist.

2. Download CAM Assist

Download the appropriate version of CAM Assist for your Siemens NX software from our website.

3. Run the CAM Assist Installer

  • Locate the file you downloaded in Step 1 and run it (double-click) it.

  • Carefully read the terms and conditions.

  • Complete the installation process by following the on-screen instructions.

4. Finish Installation

  • On the final page of the installer, there is an checkbox to ‘Run Siemens NX’:

    • Check the box to open Siemens NX automatically when the installer is closed

    • If you don’t Siemens to open automatically, uncheck the box.

 Click here to show/hide more detailed step-by-step installation instructions

If you see the 'Windows protected your PC' blue dialog at the start of the install, take the following steps

First, click the underlined More info.

image-20240531-103524.png

Then, click Run anyway to proceed with the installation.

The CAM Assist installation will now continue (see below).

The first part of the installation setup is the ‘Welcome’ page.

  1. Click ‘Next’.

image-20240117-150446.png

The next page holds the License Agreement (or Terms of Use Agreement).

  1. Fully read the Terms of Use Agreement.

  2. Click ‘I Agree’ to agree with the terms and continue the installation.

Click ‘Cancel’ if you do not agree or if you have questions you would like to get answered before continuing (please contact CloudNC Support).

image-20240117-150716.png

When the installation has completed, a summary page is displayed.

  1. Ensure the checkbox for ‘Run Siemens NX’ is checked.

  2. Click ‘Finish’.

    • Siemens NX is opened automatically.

Congratulations, the CAM Assist add-on to Siemens NX is now installed!

image-20240117-150848.png

Locating CAM Assist

  • After installation, you should see a CAM Assist menu, as depicted in the image below.

  • In you don't see the CAM Assist icon, open a part within the software and attempt the process again.

  • Alternatively, if the CAM Assist icon is still not visible, right-click on the menu bar. Choose "Tabs/Bar" and ensure that "CAM Assist" is selected from the options.

image-20240117-154336.png

Help and Support

If there are any other questions relating to the installation procedure or any other CAM Assist feature, refer to the CloudNC Product Support page.

  • No labels