Across the top of Cutting Parameters are five ‘input tabs’ that display the inputs that Cutting Parameters uses to make dynamic recommendations:
Input tab layout
When Cutting Parameters is first opened, the inputs come from the configurations that were used by CAM Assist to compute the toolpath strategy.
Some of the inputs can be changed within Cutting Parameters; this is done via context-specific pop-ups that appear when an ‘input tab’ is clicked.
Each input tab contains the following features:
# | Feature | Description |
|---|---|---|
1 | Header | Shows the current input information used by Cutting Parameters. The source of the ‘input' depends on the tab. |
2 | Pop-up | On clicking the tab header, a pop-up is displayed that contains parameters that enable to change the cutting parameters configuration. |
3 | Close | Clicking the button performs the following:
|
