Versions Compared

Old Version 6

changes.mady.by.user Kevin Strider

Saved on

compared with

New Version 7

changes.mady.by.user Kevin Strider

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The ‘General’ section of the Tool Use Tab enables you to specify the environment in which machining will take place, and edit the properties of the chosen machine.

The layout of the 'General ' section is changed when Edit machine properties is clicked (see below)

image-20240212-151110.png

Features

The following table describes each feature in the General section, as shown in the above screenshot.

Feature

Description

Tool library

The Fusion tool library to use within CAM Assist.

Stock material

CAM Assist will select tools, machining strategies, and cutting data presets based on the selected material.

Choose machine

The drop-down list contains two categories of machine:

Note

If a [Local] machine is selected:

  • The ‘General’ section is expanded to include ‘Machine properties’. CAM Assist requires a value for these properties to compute toolpath strategies.

  • The Edit machine properties button changes to Hide machine properties.

  • Continue from step 3 of the How to Edit Machine Properties instructions.

Edit machine properties

Enables you to specify a set of machine properties that are needed to compute a toolpath strategy for the selected part.

For step-by-step instructions on using this button, see How to Edit Machine Properties.