This page provides a record of all the ‘features’, ‘improvements', and ‘fixes’ contained within CAM Assist releases.
...
v1.11.0
Release date: 20th December 2023
Features
Multiple Tool Orientations Selection with 3+2 Machining (see the General tab)
Following on from your feedback, we have evolved our 3+2 feature to give you more options for selecting the machining direction:
Aligned to the X, Y and Z axes
Select ‘by setup’
Full automatic selection by CAM Assist (beta customers only)
If you select the direction ‘by setup’, you can then also:
Decide if you want to use the same direction for roughing and finishing
Use the interface to select which directions you want to machine the part from (respecting the order of selection)
...
Fixed some minor cases where CAM Assist doesn’t run after installation
Fixed a minor issue around V1.10 of CAM Assist appearing as an outdated version
Fixed further errors around unsupported hole types
Hotfix v1.11.1
| Expand | ||
|---|---|---|
| ||
|
...
v1.10.0
Release date: 10th November 2023We’re excited to bring you the latest enhancements to CAM Assist, driven by our users' feedback.
Features
3+2 axis machining - get started with our newly introduced 3+2 Axis machining. The feature is in beta for Finishing and experimental for Roughing. Our current 3+2 is ideal to run on simple to moderate parts up to 12”x12” (300mm x 300mm).
3+2 has been our most requested user feature: we’d love to hear your feedback!
To use the 3+2 axis machining, check its option in the General tab.
Tool management assistance - our Tool Onboarding Manager alerts you to tool compatibility issues and guides you through fixes.
Material-aware tool management - the ‘Materials’ tab in the Tool Onboarding Manager UI has been updated to be more intuitive.
User-friendly error guidance - Are you new to CAM Assist? Our tailored error messaging will help you navigate any initial challenges smoothly.
...