Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Before continuing, if you’re not familiar with the Cutting Parameters add-onExplorer, it’s recommended you take a look at the Introduction and Overview.

Features and functionality

The following screenshot shows the main layout and features of the Cutting Parameters Explorer.

...

Cutting Parameters ' Explorer’s main layout has the features are shown in the following table.

Close - closes Cutting Parameters completely, not the pop-up!

To close a pop-up, click again on any of the tabs

#

Feature

Description

1

Top Title banner

Contains the add-on title ‘CloudNC 'Cutting Parameters’Parameters Explorer’.

(Cutting Parameters can be collapsed resized and expanded (repositioned in the same way as other aspects of Fusion’s Mastercam’s user interface)

2

Cancel

Cancels the current action, closes the Cutting Parameters Explorer, and returns focus to Mastercam.

3

Input tabs

Across the top of the Cutting Parameters Explorer are five ‘input tabs’ that display the inputs that Cutting Parameters uses used to make recommendations.

When Cutting Parameters is first opened, the inputs are populated by the choices already made in CAM Assist (the ones used to compute the toolpath strategy).
Some of the inputs can be changed within the Cutting Parameters Explorer via context-specific pop-ups, which appear when an input tab is clicked.

For more details, see Input Tabs.

34

Display Area

Contains either the 2D Milling diagram (see #4) or the Heatmap Heatmaps (see #5).

45

‘2D Milling diagram’ option

Displays the 2D Milling diagram in the Display Area.

For details, see 2D Milling Diagram.

56

‘Heatmaps’ option

Displays selected Heatmaps in the Display Area.

For details, see Heatmaps.

67

Report a bad recommendation

Opens the ‘Report a bad recommendation’ form that, once completed, is sent to the Product Support team.
For details, see How to Report a Bad Recommendation.

78

Aggression control Control switch/sliders

Two There are two sliders that are used to indicate the level of aggressive control over the use of the tool for the machining operation.

The switch to the left of the sliders controls which sliders are displayed.

For details, see Aggression Control Sliders.

89

Fine tune

An expandable/collapsible section that contains a set of ‘Fine tune’ sliders that enable you to control the feeds and speeds of the tool used for the selected operation.

For more information, see Fine Tune.

910

Scroll bar

Use the scroll bar to scroll the display area and the ‘Fine tune’ section (if expanded).

Bottom banner

1011

Session settings

Displays the ‘Session settings’ pop-up:

  • Sign out - (Log out) of Cutting Parameters.

  • Unit system:

    • Imperial - switches Cutting Parameters to display all units in the imperial system.

    • Metric - switches Cutting Parameters to display all units in the metric system.

  • Version - the version of Cutting Parameters installed.

1112

Save operation cutting data

Saves the configuration reconfiguration of the tool’s cutting parameters and applies them to the selected tool in the Fusion Browser.

12

Bottom banner

Note

Toolpaths view in Mastercam.

...

Resize and reposition

Resize

Info

The Cutting Parameters interface Explorer UI can be resized to whatever is most convenient: the resized interface is session-specific and will not be reused when the Cutting Parameters Explorer is next opened.

To resize Cutting Parameters, click :

  • Click and drag any edge

...

  • to the required size (the resize icon will be displayed when the action is available).

Reposition

Info

The Cutting Parameters Explorer can be positioned anywhere within the desktop (it is not confined to the Fusion Mastercam window).

To reposition Cutting Parameters, drag :

  • Drag the top banner to the desired position: it can be docked within

...

  • Mastercam.