This tutorial guides you through the process of using CAM Assist's ‘3 - Axis’ machining mode to compute a toolpath strategy for a part.
The tutorial uses CloudNC’s ‘Demo Part 1’ part. However, the same process can be used for any part that can be opened in Siemens NX.
| Info |
|---|
CAM Assist works with the Siemens NX manufacturing environment and manufacturing templates. |
Preparation
Before following this tutorial, you must have successfully completed the following steps:
Step 1 - Installing a Part
Step 2 -
installed CloudNC CAM Assist for your version of Siemens NX.
If you have not yet installed CAM Assist, please follow the steps detailed in Installing CAM Assist.
Install CAM Assist - follow the instructions in Installing CAM Assist.
Open a part - follow the instructions in Opening a Part (this tutorial uses ‘Demo Part 1’).
Open the ‘CAM Assist’ menu - it contains the CAM Assist ribbon shown in the screenshot to the right.
Click CloudNC CAM Assist - in the CAM Assist ribbon.
Configuring the ‘Target setups’
Ensure at least one ‘setup’ is checked.
The content of the ‘Target setups’ section reflects the workpiece configuration of the part, as displayed in the 'Geometry View’ of the Siemens NX Operation NavigatorUsing the ‘3-Axis’ Machining mode
Step 1 - Opening a part
CAM Assist is supplied with 4 ‘Demo’ parts that are available from the CAM Assist menu as soon
Selecting a part and opening CAM Assist
1. <b>Select a part</b> - you have the choice of using:
<ul>
<li>Your own part.</li>
<li>One of the Demo Parts provided by CAM Assist, available from:</li>
<ul>
<li>The opening CAM Assist menu (see <a href="https://cloudnc.atlassian.net/wiki/spaces/CAFSNCUG/pages/153223231/Getting+Started+with+a+Demo+Part" target="_blank">Getting Started with a Demo.</a>)</li>
<li><a href="https://cloudnc.atlassian.net/wiki/spaces/CAFSNCUG/pages/145096925/CAM+Assist+Ribbon" target="_blank">The CAM Assist Ribbon.</a></li>
</ul>
</ul>
</ol>
| Info |
|---|
CAM Assist works with the Siemens NX manufacturing environment and manufacturing templates. |
Open CAM Assist - in the /wiki/spaces/CAFSNCUG/pages/145096925, click CloudNC CAM Assist.
Specifying the ‘3+2 Axis’ machining mode
Within CAM Assist's <a href="https://cloudnc.atlassian.net/wiki/spaces/CAFSNCUG/pages/152174681/Setup+Tab" target="_blank">Setup tab</a>:For Machining Mode - select ‘3+2 Axis’.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Video |
On completing the above Preparation, you’ll see the CAM Assist user interface with ‘Demo Part 1.prt’ open, as shown below.
To use the ‘3 Axis’ Machining mode, you’ll take the following steps:
Specify the Machining mode
For Machining mode, CAM Assist provides you with two options: ‘3 Axis’ and ‘3+2 Axis’.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Check the box for 3-Axis |
Configure the Target setups
Check the Setup
Within CAM Assist, the ‘Target setups’ are numbered sequentially, with the ‘Workpieces’ in the same order as in NX’s Geometry view.
You’ll notice that ‘Demo Part 1’ has two Target setups: ‘Setup 1’ and ‘Setup 2’.
If you want CAM Assist to create a toolpath strategy for a setup, ensure
that theits respective
setup'scheckbox (
such as 'Setup 1
'/Setup 2) is checked.
For each setup that you’ve checked:
Avoidance geometry - (optional) see Avoidance Geometry, below| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Checkthe box for Setup 1 |
Set the Avoidance Geometry
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Specifying Avoidance Geometry is an optional step |
For details and step-by-step instructions, see the tutorial Using Avoidance Geometry.
Set the Workholding security
-CAM Assist will choose roughing tools suitable for the specified workholding.
Set the slider to the required position between
, or at,the two extremes:
Excellent - a more secure ('excellent') workholding, such as a vise with serrated jaws, will result in CAM Assist selecting larger tools or more aggressive cutting parameters. This will result in faster toolpaths, but with more force on the workpiece.
Poor - a less secure ('poor') workholding, such as a thin part held by a soft jaw, will result in CAM Assist selecting smaller tools or less aggressive cutting parameters. This will produce slower toolpaths, but with less force on the workpiece.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Set the Workholding security slider to 'Excellent’. |
| Info |
|---|
If you decide to check ‘Setup 2’, similar options for ‘Setup’ 1 will be displayed (that is, ‘Avoidance Geometry’ and ‘Workholding security’). |
Click OK.
The CAM Assist UI closes.
CAM Assist now computes a toolpath strategy for the part within Siemens NX.
Avoidance Geometry
This geometry ensures that machining operations do not occur in specific portions of the stock for this setup, such as the space under the part or between the vise jaws.
These blocked out portions (Avoidance geometry) are different from fixture bodies. While fixture bodies MUST be avoided, the Avoidance Geometry is considered part of the stock and may be gouged in specific cases. For example, drilling a through-hole may pierce the avoidance geometry but not the fixture.
Fixture bodies also require clearance from any tool, whereas all roughing tools may touch the surface of the Avoidance geometry.
Using Avoidance geometry
To use Avoidance geometry, take the following steps:
Click on the Avoidance geometry filled-block icon (to the right of ‘Avoidance geometry (0).
Click on the portion of the model/part to indicate avoidance geometry.
Examining CAM Assist’s other tabs
Before clicking OK, it’s a good idea to examine the other tabs to ensure that the requirements for CAM Assist’s tool strategy are fully configured:
Compute a toolpath strategy
When you have full configured CAM Assist:
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Click OK |
On clicking OK, CAM Assist
closes and computes a toolpath strategy, which is displayed within the ‘Program Order View' of Siemens NX’s Operation Navigator (as illustrated in the following screenshot).
