Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Sections

The Tool Usages tab contains the following sections:

  • Face milling

  • Roughing

  • Finishing

  • Hole making

  • Deburring

Tooltips

Tooltips contain useful information on the purpose and use of features within the Tools tab. To see a tooltip, just hover over a feature.

For more details on each of the above features, see below

image-20240704-121117.png

Face milling

Contains a ‘Facing operations’ checkbox that is used to configure CAM Assist to compute Facing operations (for Rouging and Finishing) or not:

  • Checked - CAM Assist will compute Facing toolpaths using a Face Mill or End Mill to face off the part.

  • Unchecked - CAM Assist will not compute Facing toolpaths for the part.

image-20240704-154420.png

Roughing

Contains a collection of checkboxes that are used to configure CAM Assist to compute Roughing operations:

Bulk roughing

  • Checked - CAM Assist will compute Roughing toolpaths to efficiently remove the bulk of the stock material around the part.

  • Unchecked -

Detailed roughing

  • Checked -

  • Unchecked -

Hole patching

  • Checked -

  • Unchecked -

image-20240704-155204.png

Finishing

Deburring

  • No labels