Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Before you can see Cutting Parameters' recommendations, you must first use CAM Assist to compute a toolpath strategy (see Getting Started with CAM Assist).

Opening Cutting Parameters

To open Cutting Parameters, take the following steps:

  1. Create a CloudNC CAM Assist toolpath strategy (see Getting Started with CAM Assist).

  2. Open the Fusion Browser.

Within the Fusion Browser:

  1. Open a ‘Setup’ folder.

  2. Expand the ‘CAM Assist’ folder.

  3. Select one of the operation folders.

Within the selected operation folder:

  1. Right-click an operation toolpath - a pop-up menu is displayed (see the screenshot, below).

  2. From the pop-up menu, select CloudNC Cutting Parameters.

  3. Cutting Parameters now opens (see Cutting Parameters Layout, Features, and Functionality).

image-20240410-125840.png

  • No labels