As it’s name suggests, the Cycle Time Estimator estimates the time required to machine each of the parts configured within a batch of Fusion files, which are specified by you.
The Cycle Time Estimator also creates a toolpath strategy for each of the parts.
Overview
To use the Cycle Time Estimator, take the following steps:
Open the Cycle Time Estimator (see below).
Upload:
Select a batch of Fusion part files (you can specify up to 10 part files).
Set the ‘options’ for the machining environment
Click Run
Cycle Time Estimates - examine the results of the estimations by navigating the toolpaths (in the same manner as in the Fusion Browser)
Results - look at the results of the estimates and identify any issues.
Export - export the results of the estimates for any of the part files. The export is a CSV (comma-separated values) file to a location of your choice.
For step-by-step instructions, see Using the Cycle Time Estimator.
Scope
The Cycle Time Estimator accepts up to 10 Fusion files.
If any Fusion file contains a configuration error then:
A cycle time estimation will not be computed for that file.
The error will be reported in the ‘Report’ tab.
Opening the Cycle Time Estimator
To open the Cycle Time Estimator, take the following steps:
Within Fusion’s ‘Manufacturer’ workspace:
Open the CAM Assist panel (see the screenshot to the right)
Within the CAM Assist panel:
Click ‘Cycle Time Estimator’
The Cycle Time Estimator opens.
For more information, see Cycle Time Estimator - Features and Functionality.
