You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 35
Next »
1. Close Siemens NX
If updating, there is no need to uninstall your currently installed version of CAM Assist.
2. Download CAM Assist
Download the appropriate version of CAM Assist for your Siemens NX software from our website.
3. Run the CAM Assist Installer
Click here to show/hide the step-by-step installation instructions
If you see the 'Windows protected your PC' blue dialog at the start of the install, take the following steps
First, click the underlined More info. | Then, click Run anyway to proceed with the installation. |
The CAM Assist installation will now continue (see below).
| |
---|
The first part of the installation setup is the ‘Welcome’ page. Click ‘Next’.
| |
The next page holds the License Agreement (or Terms of Use Agreement). Fully read the Terms of Use Agreement. Click ‘I Agree’ to agree with the terms and continue the installation.
| |
When the installation has completed, a summary page is displayed. Ensure the checkbox for ‘Run Siemens NX’ is checked. Click ‘Finish’.
| |
4. Finish Installation
Click here to show/hide more detailed step-by-step installation instructions
If you see the 'Windows protected your PC' blue dialog at the start of the install, take the following steps
First, click the underlined More info. | Then, click Run anyway to proceed with the installation. |
The CAM Assist installation will now continue (see below).
| |
---|
The first part of the installation setup is the ‘Welcome’ page. Click ‘Next’.
| |
The next page holds the License Agreement (or Terms of Use Agreement). Fully read the Terms of Use Agreement. Click ‘I Agree’ to agree with the terms and continue the installation.
| |
When the installation has completed, a summary page is displayed. Ensure the checkbox for ‘Run Siemens NX’ is checked. Click ‘Finish’.
| |