Across the top of the Cutting Parameters add-on are five ‘input tabs’ that categorize the inputs that are used to make dynamic recommendations:
Features
When Cutting Parameters is first opened, these inputs come from the configurations that were used by CAM Assist to compute the toolpath strategy.
Some of the inputs can be changed within the Cutting Parameters add-on; this is done via context-specific pop-ups that appear when an ‘input tab’ is clicked.
Each input tab contains the following features:
# | Feature | Description |
|---|---|---|
1 | Header | Shows the current input information used by the Cutting Parameters add-on. |
2 | Pop-up | On clicking the tab header, a pop-up is displayed that contains parameters that enable to change the cutting parameters configuration. |
3 | Close | Clicking the button performs the following:
|
