Tutorial: Using the 3+2 Axis Machining Mode

The manner in which the ‘3+2’ Machining mode is used, depends on the choice made for the Machining direction.

For the ‘3+2 Axis’ Machining mode, CAM Assist provides three Machining directions:

• Aligned to X, Y, Z axes - the tool orientation used to create toolpath strategies can only come from the +X, -X, +Y, -Y, and +Z axes.

  • See Tutorial: 3+2 Axis 'Aligned to X, Y, Z Axes' Machining Mode.

• User defined - the tool orientation comes from the orientation specified by the user in the Target setup(s) within CAM Assist.

  • See Tutorial: 3+2 Axis 'User-defined' Machining Mode.

• Automatic - automatic 3+2 strategies are only available for evaluation through participation in CloudNC’s ‘Early Access Beta Program'

  • See Using the 3+2 'Automatic' Machining Mode.