Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

The Cutting Parameters Explorer provides recommendations for a tool associated with an operation toolpath selected from Siemen NX’s ‘Geometry View’.
Therefore, before you can see/adjust the recommendations, the Toolpath view must first have been populated with a toolpath strategy that was computed by CAM Assist for a selected part.

How to open the Cutting Parameters Explorer

To open the Cutting Parameters Explorer, take the following steps:

  1. Create a CloudNC CAM Assist toolpath strategy (see Get Started with CAM Assist).

  2. Open Siemens NX’s ‘Geometry View' - it contains the toolpath strategy from Step 1.

  3. Within the Geometry View, select a supported operation toolpath (as shown in the top screenshot to the right).

  4. In the CAM Assist ribbon, click on the Cutting Parameters Explorer icon the operation toolpath - a pop-up menu is displayed.

  5. From the pop-up menu, select Cutting Parameters Explorer:

    • The option is at the bottom of the pop-up menu (see the screenshot to the right).

    • The Cutting Parameters Explorer now opens.

For a detailed looked at the Cutting Parameters Explorer, see Features and Functionality.

image-20240723-145722.pngimage-20240821-142224.png

  • No labels