| Info |
|---|
If you are pressed for time, you can skip Face mills. CAM Assist will work well without any Face mills in your toolsettool library, you simply won’t get facing toolpaths generated at the beginning of your program. |
The CAM Assist Face Milling strategy produces separate roughing and finishing passes with your face mill, depending on how much stock needs to be removed. Therefore, you will need two cutting data presets on your face mill tool.
...
Stepdown and Stepover
| Info |
|---|
If stepdown and stepover values are not specified , (and you have used the Tool Use tab to ‘allow’ the tool to be used) then CAM Assist will ensure that suitable cutting data parameters are provided for the machining operation. |
If you would prefer to specify the stepdown and stepover values, in Fusion 360, yourself then you will need two cutting data presets:
...
Then specify stepdown and stepover values for each of the above presets in Fusion 360.
Typically, you would want a smaller stepdown for the Finishing preset, and a larger stepdown for the Roughing preset.
...
preset
...
.