Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Supported operations (and their alternative names) can be used for the operation aspect of the Preset name format.

The following table shows the operations that can be used in Mastercam and are supported by CAM Assist:

The table uses the following columns:

  • Operation - name of the operation.

  • Abbreviation - abbreviation of the material, as used in the ‘Allowed Operations’ column of CAM Assist’s ‘Tool use’ table.

  • Tool type - associated tool type.

  • Toolpath type - associated checkboxes in the Advanced tab.

  • Alternative name - alternatives names for the ‘Operation’ that can also be used in Fusion and are supported by CAM Assist.

To sort the table, click the sort icon that appears when you hover over a column’s header.

Operation

Abbreviation' ('Tool use' tab)

Tool type

Toolpath type
(‘Advanced’ tab)

Alternative names
You can use these for the operation aspect of a cutting data preset’s name

Ball finishing

Ba

Ball mill

Finishing

BallFinishing, Ball_Finishing

Chamfering

Ch

Chamfer mill

Deburring
Finishing

Chamfer

Drilling

D

Drill

Hole making

Drill

Face finishing

Ff

Face mill

Face milling

FaceFinishing, Face_Finishing

Face roughing

Fr

Face mill

Face milling

FaceRoughing, Face_Roughing

Finishing

F

Finishing

Finishing

Flat finishing

Fl

End mill

Finishing

FlatFinishing, Flat_Finishing, Floor Finishing, FloorFinishing, Floor_Finishing

Helical boring

HB

End mill

Hole making

HelicalBoring, Helical_Boring

Roughing

R

Roughing

Bulk roughing
Detailed roughing

Spot drilling

SD

Spot drill

Hole making

SpotDrilling, Spot_Drilling

Tapping

Ta

Taps

Hole making

Tap

Threading

Th

Thread mill

Hole making

Thread

Wall Finishing

Wa

End mill

Finishing

WallFinishing, Wall_Finishing


Smart Keywords

Smart keywords can be used to assign one Fusion cutting data preset to multiple operations within CAM Assist.

For example, you could use the cutting data preset “Aluminum - Side milling” to assign it feeds and speeds to the Roughing, Wall finishing, Flat finishing, and Helical boring operations of a tool.

For more details, see Smart Keywords.

  • No labels