Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Video
The following step-by-step instructions are illustrated in the YouTube video How to Use Generate Avoidance Geometry.

Step-by-step instructions

Within the Fusion ‘Manufacture’ workspace:

To magnify any image/screenshot, just click it.

image-20240516-144433.png
image-20240516-144344.png

Within Generate Avoidance Geometry:

  1. Select the ‘Setup(s)’ - check the required ‘setup' box for any of the setups associated with the part.

  2. Click Generate

    • Avoidance geometry is generated for each checked ‘Setup'.

    • The add-on is closed and focus switches back to Fusion.

image-20240417-144828.png

  1. The avoidance geometry is now available in the Fusion Browser and CloudNC CAM Assist, as shown in the following screenshot.

generate_avoidance_geometry_showall.drawio.png

  • No labels