FAQs

The following FAQs (Frequently asked Questions) might provide first-step answers to your questions or issues.
If you can’t find the answer to your question/issue here, please contact Product Support.

This page contains the following questions (with accompanying answers):

1 Installing CAM Assist
2 CAM Assist administration
3 Using CAM Assist
- 3.1 How to set obstructions in CAM Assist?
- 3.2 I've selected a tool library and CAM Assist says its "analyzing" the toolset, but it doesn't load the tool library. What do I do?
4 General questions

Installing CAM Assist

How do I install CAM Assist?

For step-by-step instructions, refer to Installing CAM Assist.

How to correct the installation directory for CAM Assist?

If you have multiple versions of NX installed on your computer and need to ensure that CAM Assist works on a specific supported version (such as NX 2206.9140), you can take the following steps to remove the CAM Assist plug-in from other installations:

Locate the custom_dirs file for the NX version want to remove for CAM Assist.
- For example, if you want to remove CAM Assist from NX2306, find the following file: C:\Program Files\Siemens\NX2306\UGII\menus\custom_dirs.dat
Open the custom_dirs file and scroll to the bottom of the file.
If found, delete the following text from the bottom of the custom_dirs file: C:\Program Files (x86)\CloudNC\Siemens NX\Add-ins\CloudNC CAM Assist
Additionally, to ensure that CAM Assist is installed and active on the desired version of NX (such as NX 2206)
1. You need to add the path to the CAM Assist plugin to the custom_dirs file for that version.
2. Locate the custom_dirs file for NX 2206 then add the path to the CAM Assist plugin at the bottom of the file.

Where is the CAM Assist menu?

If you don't see the ‘CAM Assist’ menu, try opening a part first then see if the ‘CAM Assist’ menu is visible.

CAM Assist menu

If the CAM Assist menu is still not visible, take the following steps:
1. Right-click on the menu bar.
2. Select Customize…
3. The Customize dialog is displayed (see the image to the right).
4. Select the Tabs/Bar tab
5. Ensure the CAM Assist option is checked.
6. Close the Customize dialog

Customize dialog

How do I uninstall CAM Assist?

For step-by-step instructions, refer to How to Uninstall CAM Assist.

CAM Assist administration

How to reset the permissions for CAM Assist?

Take the following steps:

Locate the file:
- C:\Program Files\Siemens\NX2206\UGII\menus\custom_dirs.dat
Right-click on the file and select Properties.

In the ‘Properties’ dialog:

Open the Security tab (see the screenshot to the right).
Click Advanced.

Adding a User:

Type a valid username in the box and click Check Names.
Click on the added user and ensure they have the relevant permissions
- The user needs ‘Write’ access to the file.
With the relevant permissions set, click OK.

CAM Assist for Siemens NX User Guide

FAQs

Analytics

Installing CAM Assist

How do I install CAM Assist?

How to correct the installation directory for CAM Assist?

Where is the CAM Assist menu?

How do I uninstall CAM Assist?

CAM Assist administration

How to reset the permissions for CAM Assist?

Where is CAM Assist’s Log file?

What network access is required for CAM Assist to function properly?

Using CAM Assist

How to set obstructions in CAM Assist?

I've selected a tool library and CAM Assist says its "analyzing" the toolset, but it doesn't load the tool library. What do I do?

General questions

What is CAM Assist?

What languages are supported by CAM Assist?

Should I always review CAM Assist recommendations?

Is CAM Assist ITAR-Compliant?

Does CAM Assist store my parts?

Does CAM Assist learn from my CAM programming?

Does CAM Assist support turning operations?

Can I use CAM Assist in a custom environment in NX?

Related content