Opening the Cutting Parameters Add-on

Owned by Kevin Strider (Unlicensed)
Last updated: Oct 25, 2024 by Geoffrey Brennan
1 min read

Cutting Parameters provides recommendations for a tool associated with an operation selected from the Fusion Browser.
Therefore, before you can see/adjust the recommendations, the Fusion Browser must first have been populated with a toolpath strategy that was created by CAM Assist for a selected part.

How to open Cutting Parameters

To open Cutting Parameters, take the following steps:

  1. Create a CloudNC CAM Assist toolpath strategy (see Getting Started with CAM Assist).

  2. Open the Fusion Browser - it contains the toolpath strategy from step 1.

Within the Fusion Browser

  1. Open a Setup folder.

  2. Expand the CAM Assist folder.

  3. Select one of the operation folders.

Within the selected operation folder:

  1. Right-click an operation toolpath - a pop-up menu is displayed

  2. From the pop-up menu, select CloudNC Cutting Parameters (see the screenshot, below).

image-20240722-135644.png
Opening CloudNC Cutting Parameters (right-click an operation toolpath)