Opening the Cutting Parameters Explorer

The Cutting Parameters Explorer provides recommendations for a tool associated with an operation toolpath selected from Mastercam’s Toolpaths view.
Therefore, before you can see/adjust the recommendations, the Toolpath view must first have been populated with a toolpath strategy that was computed by CAM Assist for a selected part.

How to open the Cutting Parameters Explorer

To open the Cutting Parameters Explorer, take the following steps:

  1. Create a CloudNC CAM Assist toolpath strategy (see Getting Started with CAM Assist).

  2. Open Mastercam’s Toolpaths view - it contains the toolpath strategy from Step 1.

Within Mastercam’s Toolpaths view

  1. Select a relevant operation toolpath.

  2. Right-click the operation toolpath - a pop-up menu is displayed.

  3. From the pop-up menu, select Cutting Parameters Explorer:

    • The option is at the bottom of the pop-up menu (see the screenshot to the right).

    • The Cutting Parameters Explorer now opens.

For more introductory information, see Inputs and Recommendations.
For a detailed examination of the Cutting Parameters Explorer, see the Features and Functionality section.

For a detailed looked at the Cutting Parameters Explorer, see

image-20240723-145722.png
Right-click pop-up menu