Getting Started with CAM Assist

Follow along with this onboarding guide for more information on getting started with CAM Assist for Mastercam:

 

https://youtu.be/slAsI39DWiw?si=3HaYX5PFDdsVuzO1

 

 

Getting started in 5 easy steps

Getting started with CAM Assist for Mastercam is a simple 5-step process:

Workflow.svg

If you follow along with the step-by-step instructions featured below, you’ll use CAM Assist to generate a toolpath strategy for a demo part, using a CAM Assist tool library.


Step-by-step instructions

You must install CAM Assist in order to make it available within Mastercam.

Download & Install CAM Assist

For step-by-step instructions on installing the CAM Assist add-on, refer to Installing CAM Assist for Mastercam.


Open a Demo Part

Video
For an illustration of the ‘getting started’ process, see the YouTube video: Getting Started with CAM Assist for Mastercam.

image-20240802-140604.png
‘CloudNC’ tab containing the CAM Assist panel

If you cannot see the CAM Assist panel, refer to I can’t see the CAM Assist panel in the Troubleshooting section.

  1. Hover over Open a Demo Part.

  2. Select one of the ‘Demo' parts:

    • Demo 1-3 - suitable for 3-Axis machining (see Machining Modes).

    • Demo 4 - suitable for 3+2 Axis machining.

The selected ‘Demo’ part opens in Mastercam.


Select a Tool Database and Setup

  1. Open CAM Assist

    • Select CloudNC CAM Assist from the CAM Assist panel.

  1. For Tool library

    • Select ‘CAM Assist [inch].tooldb’

  2. For Stock material

    1. Select ‘Aluminum’

  3. For Setup orientation

    • Ensure at least one Setup is checked (for example, ‘Machine Group-1’).

    • For each selected Setup, choose a Selected plane (orientation) from the drop-down options.

 

Confirm a few configuration settings


Click the Green check button Accept icon.png

  1. When you’ve finished configuring CAM Assist, click the green checkmark.

After which, CAM Assist:

  • Closes its user interface.

  • Uses the CAM Assist configuration to compute a toolpath strategy for each checked ‘Setup’, which is then displayed in ‘Toolpaths’ (see the screenshot to the right).

 

 


Next step

This guide showed you how to use one of CAM Assist’s sample tool libraries to generate a toolpath strategy for a ‘Demo’ part.

For more detailed information on the features and functionality of CAM Assist, refer to the CAM Assist for Mastercam section.