'Machining Mode' Tutorials

Owned by Kevin Strider (Unlicensed)
Last updated: Aug 09, 2024
1 min read

 CAM Assist provides two machining modes, available from the General tab: ‘3 Axis’ and ‘3+2 Axis'.

image-20240806-130957.png
CAM Assist - ‘3 Axis’ Machining mode option

 

image-20240806-131031.png
CAM Assist - ‘3+2 Axis’ Machining mode option

This section contains the following tutorials that guide you through the process of using the machining modes within CAM Assist to create a toolpath strategy for a part.