/
Opening the Soft Jaw Designer

Opening the Soft Jaw Designer

Owned by Kevin Strider (Unlicensed)
Last updated: Jun 27, 2024
1 min read

Before you can use CloudNC’s Soft Jaw Designer, you must first open a Fusion model that contains at least a part (that model could also contain existing jaws).

How to open the Soft Jaw Designer

To open the Soft Jaw Designer, take the following steps:

Within Fusion:

  1. Open a model that contains at least a part (the model could also contain bodies from which the jaws will be designed).

Within Fusion’s ‘Manufacturer’ workspace:

  1. Open the CAM Assist panel (see the screenshot to the right)

Within the CAM Assist panel:

  1. Hover over the ‘Fixture Management’ option.

  2. Click ‘Soft Jaw Designer’

    • CloudNC’s Soft Jaw Designer opens in Fusion’s ‘Design’ workspace.

For more information, see Soft Jaw Designer - Features and Functionality.

image-20240627-102737.png
CAM Assist panel



 

Related content

Using the Soft Jaw Designer: an Example
Using the Soft Jaw Designer: an Example
CAM Assist for Fusion User Guide
More like this
Introduction and Overview‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎
Introduction and Overview‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎
CAM Assist for Fusion User Guide
More like this
Soft Jaw Designer
Soft Jaw Designer
CAM Assist for Fusion User Guide
Read with this
Features and Functionality‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎
Features and Functionality‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎
CAM Assist for Fusion User Guide
Read with this