Features and Functionality‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎

Before continuing, if you’re not familiar with Soft Jaw Design, it’s recommended you take a look at the Introduction.

Features and Functionality

To magnify any image/screenshot, just click it.

The following table details all of the features of the Soft Jaw Designer.

Feature	Description

Feature	Description
Top banner	Contains the add-on title ‘CloudNC Soft Jaw Designer’. The Soft Jaw Designer add-on can be collapsed and expanded in the same way as other aspects of Fusion’s user interface.
Part	Used to indicate the part within the Fusion model.
Jaws	Used to indicate the bodies, within the Fusion model, from which the jaws will be designed. Select existing bodies from which the jaws will be designed (if they have already been modelled) or leave the selection empty to auto-generate cuboid-shaped stock.
Jaw Orientation	An expandable/collapsible section.
Spindle Direction	Used to indicate the direction from which the spindle/tool is expected to approach the part.
Opening Direction	Used to indicate the direction that the jaw opens and closes to secure the part.
Jaw Geometry	An expandable/collapsible section. The values in this section are automatically populated based on the selections made.
Length	The size of the jaw stock along the X-axis.
Width	The size of the jaw stock along the Y-axis.
Height	The size of the jaw stock along the Z-axis.
Gap	The distance between the two jaw stocks.
Jaw Position	An expandable/collapsible section. The values in this section are automatically populated based on the selections made.
X	In the XY plane along the X-axis, the displacement of the center of the jaw stock from the center of the selected body.
Y	In the XY plane along the Y-axis, the displacement of the center of the jaw stock from the center of the selected body.
Z	Amount of offset of the jaws with respect the part.
Cut-out geometry	An expandable/collapsible section.
Corner Refer Drill Size	The drill size used for corner relief, which is used to create clearance allowances for sharp corners.
All-around Clearance	The distance between the internal edge of the jaws and the part.
Interlock Prevention	Checked - prevents interlock between the part and the soft jaws. Enables the part to be inserted into the soft jaws from the top and the Opening Direction. Unchecked - does not prevent interlock between the part and the soft jaws. If the part has a complex outline then the resulting design of the soft jaws may mean the part can only be inserted from above.
Multilevel	Checked - designs a multilevel soft jaws design. Unchecked - designs a single level soft jaws design.
Z levels	This parameter is only displayed if Multilevel is checked. Used to indicate the Z-levels for a multilevel soft jaws design.
Bottom banner	Contains the following: OK - uses the above parameters to design soft jaws to secure the part. The designed soft jaws are then available in the Fusion Browser and when using CloudNC CAM Assist. Cancel - cancels the current design session and closes the Soft Jaw Designer (a design is not created). Focus is returned to Fusion.