Working with Fusion's Tool Library

This section of the User Guide will help you understand how to configure your Fusion Tool Library to maximize its suitability for use with CAM Assist.

‘Working with the Fusion Tool Library’ is split into two pages:

1. How much Fusion configuration is required?

   • Shows how much or how little you could configure Fusion’s Tool Library and how CAM Assist analyzes, reports and uses that configuration to compute toolpath strategies.

2. How to Name Fusion Cutting Data Presets

   • Explains the ‘Preset name format’ used for naming cutting data presets within Fusion’s Tool Library.

   • Provides examples of the names for presets for supported materials and operations.

Reference

You may find the following reference pages useful:

• Supported Materials

  • Lists all of the materials that can be used in Fusion and are supported by CAM Assist.

  • These materials can be used for the material aspect of the Preset name format.

• Supported Operations

  • Lists all of the operations that can be used in Fusion and are supported by CAM Assist.

  • These operations can be used for the operation aspect of the Preset name format.

• Smart Keywords

  • Lists all of the smart keywords that can be used to assign one Fusion cutting data preset to multiple operations within CAM Assist.

  • Smart keywords can be used for the operation aspect of the Preset name format.